How To Finish Poly Products

Spectis products have two coats of paint and arrive ready to paint or stain. The second coating of paint is an exterior product that serves as a primer and allows for a beautiful finish in the field. All Spectis products require finishing in order to complete installation.

Steps For Finishing:

• Let Spectis Adhesive Dry 24-48 Hours Before Any Finishing
• Remove Any Excess Adhesive Once Dry
• Remove Any Dirt, Oil, Or Grease From Product With A Remover Product
• Rough Up The Surface Around Any Holes Made During Installation Using Sandpaper
• Sand All Joint Areas For A Smoother Appearance
• Remove All Excess Sanding Dust
  • Apply A Filler To Any Unsightly Areas, Sanding Between Coats
• Prime Any Areas That Required Filler With Interior/Exterior Latex Primer
• Use An Exterior Paintable Latex Caulk For Any Seams For A Clean Installation
• Choose A Paint To Match Your Design - Dark/Glossy Paints Can Accentuate Installation Flaws
• Spectis Product Is Ready To Paint

We highly recommend the Spectis Adhesive and Finishing Putty for finishing Spectis Polyurethane Products. View these top of the line, specially formulated products here!